Clear Cymbus Device Activations

iOS Login Failure: A login error has occurred. Device Activation Limit Reached.

Android Login Failure: Error from Provisioning server.

The Cymbus UC client is limited to two activations per user. When logging into the Cymbus app, if you get an error stating “Device Activation Limit Reached” or "Error from Provisioning server," you will need to clear one of your existing activations to log in on this new device.

Login_Failure.png

Cymbus_error.png

From a desktop or mobile app

1. Launch your desktop or mobile app (one that has been successfully activated) and navigate to the End User Portal. Depending on the app, it may be accessed from the GLobe.jpg globe icon (as seen below) or in  Cymbus_Settings_Icon_Android.jpgSettings.

2. Click Devices to display your activated devices.

3. Find the record of the device that you wish to deactivate, then click Delete.

4. A message will pop up asking if you're sure you want to delete this device. Click [Delete] to confirm.

Steps.png

 Success

You can now log in on a new device.

 

From a web browser

1. Using a web browser, access the End User Portal and log in.

Cymbus_Device_Clear_5.png

2. Click the Devices line to display your activated devices.

Cymbus_Device_Clear_6.png

3. Find the record for the device that you wish to deactivate and click Delete.

Cymbus_Device_Clear_7.png

4. A message will pop up asking if you're sure you want to delete this device. Click [Delete] to confirm.

Cymbus_Device_Clear_8.png

 Success

You can now log in on a new device.

 

Was this article helpful?
0 out of 0 found this helpful